Vineyard, Equine, Landscape, Orchard Trailed Spreader

Vineyard, Equine, Landscape, Orchard Trailed Spreader

SAM Machinery

SAM Machinery is manufactured by Coombridge & Alexander, based in Hamilton, New Zealand and has been the farmers’ favourite choice for over 80 years. It is well known for its range of yellow and green SAM Fertiliser spreaders, feed wagons and tip trailers. In 2020, they entered the horticulture, viticulture, and market garden markets with the SAM Orchard Spreader.

Simple and versatile.

With the same practical design and easy-to-use operation that all SAM’s are known for, the SAM Orchard Spreaders are made to meet the needs of modern orchards, vineyards and the like. They have a lower profile and narrower width and offer great versatility in what you can spread.

Designed primarily for spreading organic matter such as compost, green matter, vermicast and mulch. This machine will also spread processed fertilisers such as superphosphate, lime and urea with absolutely no changeover time!

SAM Computer control

The Orchard Spreader includes a computer-controlled hydraulic floor. The SAM controller lets you switch between spreading and banding with a single button. Rates are input from the operator’s seat.

Banding compost, green matter and mulch using the side conveyor

The floor mat moves toward the front of the machine, moving material onto the side banding conveyor. This creates a precise banding or piling pattern in full view of the operator. The banding direction can also be switched to the opposite side, handy for rut filling (optional extra).

Spreading organic material and processed fertilisers using spinners

For a spread pattern behind the machine, the floor mat moves backwards toward the spinners. Where you have different planting centres, spread widths can be adjusted by setting the spinners’ speed from the controller.

30-60 l/min required from your tractor.

The standard cover is manually thrown across the load and fixed in place with bungys and stainless fasteners. Keeping it simple.

If you are using your machine on the road you will need a set of lights. They are easy to mount and hardy for knocks and general wear and tear.

Weatherproof lights are LED and plug directly into your power source.

We have tough high performing tyres to suit any application. They are chosen for their quality and durability.

We can change tyre sizes to suit your specific needs. 10/75 X 15.3 Tractor tread tyres are standard. Or you can go for a different tread.

Larger 400/60 X 15.5 12-ply tyres are also available. These larger tyres can be good if you have softer, wetter conditions. However they do add to the height of the machine.

Spreads to the right hand side of row only. It simply bolts on.

SAM simply switch the disc direction set up to suit.

Centre blocker – spreads on the rows either side of your machine. It simply bolts on in the middle section.

You can also add bolt on wings to either side of the centre blocker. This is for blocking even more of the row.

The set up shown here has the centre blocker with the wings added.

SAM simply switch the disc direction set up to suit.

It is possible to increase the machines capacity by adding a tophat.

There are two sizes available. The largest top hat increases your capacity by 2 cubic metres (shown here). The smaller tophat increases your capacity by 1 cubic metre.

These have been popular for our New Zealand wine growers.

Your machine can be manufactured with a narrower bin. Options are: 1.1, 1.3, 1.4 & 1.8m

Our 1.4m option has been very popular with hops growers.

Adding load cells give you improved accuracy as they are weighing the product in your bin. Orchard Spreaders have three load cells fitted.

All load cell machines now come standard with an electric back door which replaces the manual winding of the back door jack. The height is simply controlled from your screen.

Also handy for closing your back door when you are driving down the road so you are not losing any product out the back.

Some vineyard customers have requested to raise their axle by 150mm. You can do this by adding axle rises at the time of build. This set up is handy if you are on rocky or variable country where it is beneficial for your chassis and spreader discs to be sitting higher above ground.

We can enable your machine to also band/pile out the left hand side of your machine. This puts product directly in front of the left hand wheel. Great for filling ruts then compressing them with the weight of the wheel. POA.

These simply bolt on to protect the machine.

10mm safety chains can be added for towing peace of mind. 13mm also available.

Watch the SAM Orchard Spreader in action

This quick video gives you a preview of the SAM Orchard Spreader in action. Check out how well the bin empties!

Everything from lime to compost to mulch

Spread the likes of super, lime, urea, sand & poultry/pig manure out back and band/pile compost, vermicast, green matter & mulch out front. Very very versatile.

Side conveyor for banding. 2 for 1!

This compact conveyor spreads material in a line to the right hand side of the Orchard Spreader. Great for banding where you need to apply product in a line or a pile. Designed to be in full view of the operator.

SAM computer controller

Quality German hardware coupled with smart Kiwi software. Turning on/off and controlling the functions of the spreader is simple. Just use the intuitive controller in your tractor. The screen is suitable for open cabs due to its high water rating (IP67).

Instant control switch

Simply flick the switch for instant starting and stopping of application. No more anticipating when your product is going to come out. There is also a piling timer set from your controller for even bursts of application.

Even does mulch!

There are three positions for the front door depending on what you are wanting to spread 1 Closed (for spreading at rear), 2 Half open (for banding at a volumetric rate) and 3 Completely removed (mulch, woodchip, bark, compost or green waste).

Strong stainless panels

Stainless bins are extremely corrosion resistant. With every component designed for reliability - your repairs and maintenance on these machines will be very low.

More stainless for longevity

Majority stainless at the rear of the machine, extends longevity of gear where you need it most. Stainless discs are run via enclosed stainless spinner tubes and two well proven speed adjustable hydraulic motors. Reliable as.

Review

Watch this Farm Trader video. Or read their full review in our News section. All machines come standard with an 800mm wide floor-belt, control screen, safety nudge bars, back spinner assembly and fixed front conveyor.

Industry leading coating protection system

All chassis's on SAM Orchard Spreaders have seen a new evolution of painting procedure. This is for extra corrosion protection. Firstly a blast then a thermal-arc spray followed by the SAM coating difference. It is mega tough stuff!

Industry leading coating protection system

All chassis's on SAM Orchard Spreaders have seen a new evolution of painting procedure. This is for extra corrosion protection. Firstly a blast then a thermal-arc spray followed by the SAM coating difference. It is mega tough stuff!

Tophat extensions (optional)

This spreader now has the largest bin capacity on the market. If you wish to add to that, there are two sizes available. The largest top hat increases your capacity by 2 cubic metres (shown here). The smaller tophat increases your capacity by 1 cubic metre. These have been popular for our NZ wine growers.

Centre banding modification

You can now centre band with every SAM Orchard Spreader! Excellent for spreading in a line in the middle of your machine or for piling in the centre. Superb for trench filling. It can even band rocks (with new optional bolt on protectors) as shown in this quick video.

Swivel coupling

Orchard Spreaders come standard with a heavy-duty swivel coupling with an insert in the eye. This adds stability in varied terrain.

Vineyard, Equine, Landscape, Orchard Trailed Spreader

With the same practical design and easy to use operation that all SAM’s are known for, SAM Orchard Spreaders are made to meet the needs of modern orchards. They have a lower profile and narrower width, and provide great versatility around what you are able to spread.

Description

SAM Machinery

SAM Machinery is manufactured by Coombridge & Alexander, based in Hamilton, New Zealand and has been the farmers’ favourite choice for over 80 years. It is well known for its range of yellow and green SAM Fertiliser spreaders, feed wagons and tip trailers. In 2020, they entered the horticulture, viticulture, and market garden markets with the SAM Orchard Spreader.

Simple and versatile.

With the same practical design and easy-to-use operation that all SAM’s are known for, the SAM Orchard Spreaders are made to meet the needs of modern orchards, vineyards and the like. They have a lower profile and narrower width and offer great versatility in what you can spread.

Designed primarily for spreading organic matter such as compost, green matter, vermicast and mulch. This machine will also spread processed fertilisers such as superphosphate, lime and urea with absolutely no changeover time!

SAM Computer control

The Orchard Spreader includes a computer-controlled hydraulic floor. The SAM controller lets you switch between spreading and banding with a single button. Rates are input from the operator’s seat.

Banding compost, green matter and mulch using the side conveyor

The floor mat moves toward the front of the machine, moving material onto the side banding conveyor. This creates a precise banding or piling pattern in full view of the operator. The banding direction can also be switched to the opposite side, handy for rut filling (optional extra).

Spreading organic material and processed fertilisers using spinners

For a spread pattern behind the machine, the floor mat moves backwards toward the spinners. Where you have different planting centres, spread widths can be adjusted by setting the spinners’ speed from the controller.

30-60 l/min required from your tractor.

Axle typeSingle-axle 70mm
Axle capacity6,000kg
Wheel type 10/75 X 15.3400/60 X 15.5 12-ply (upgrade)
Jack type70mm screw jack
Overall length4.75m
Overall width1.6m
Overall height1.44m
Bin width1.64m
Bin length2.94m
Capacity2.5m3
Superphosphate3.3T
Lime4.8T
Urea2.3T
Tare Weight1155kg

Data Sheet Download

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare